Coffee beans & grounds; Tea leaves & powders.
Ready to use coffee conveying system
Pneu-Con’s Coffee Conveying System has our unique Whisper Loader at its core. Whisper Loader is a self-contained vacuum conveying system. By enhancing Whisper Loader with additional components and options specifically engineered for processing coffee, our Coffee Conveying System is the perfect solution for efficiently moving and protecting coffee beans during processing.
Fully assembled and ready to use. Easy to install and operate. Low system maintenance.
Body & Materials
100% seal-welded body, in aluminum or stainless steel with smooth internal finish, boxed-tangential material inlet. Material Pick-Up: Adjustable Aluminum Pick-up Lance & 15-ft flexible hose.
Standard vacuum source is a durable, long-life brush-type motor. Tangential discharge.
Flat-Disc polyester felt filter with food-grade rubber gasket (seals cover to body).
System & Controls
Pneu-Vue PLC-based Control Panel, NEMA 1 Hinged Enclosure. Standard voltage 120VAC/10/60Hz. Mounting flange and 6”discharge spout.
Spun aluminum cover assembly with motor-mount tabs and integral air-blast pipe with Vibra-Pulse automatic filter-cleaning system.
Coffee & Tea Application—How it works
Transfer ‘green’ coffee beans from a bag, super sack, or box to a roaster, bag dump station, then to a whole bean packaging station. Or, transfer from a roaster to a grinder, then to a grounds packaging station.
Challenges and Solutions
Every materials has it challenges, and we have the right solutions to counter them.
Our Coffee Whisper Loaders let you transfer green coffee beans from a bag, super sack or box to a coffee roaster.
Product movement can be dangerous and tedious. We offer portable feed bin hoppers that allow you to move your products safely and efficiently.
Our products use speed control as well as a boxed inlet system that helps deduce impact and prevent a breakdown of the materials.
Limited Floor Space
Not every factory has the same amount of space. Our systems are built to work in compact layouts with specially placed side access filters for convenience.
Our systems are equipped with primary and secondary filtration systems, and built with high efficiency PTFE filter media that ensure a dust-free environment.
Customize your machinery
- Custom material inlets. Sanitary inlets,
boxed inlets and Ferrule/tri-clamp fittings.
- Under 8 Cubic foot volume limit as safe
design in view of NFPA Explosion guidelines.
- Explosion proof motors for Class I/II classified areas.
- Various voltage configurations:
120v, 220v, 24V, 460v.
- Batching Scale hopper to hold/dispense desired amount of material by weight or volume, by loss in weight or gain in Weight.
- Custom design specific to applications.
- Batch, continuous, or flood fed systems.
Options & accessories
A variable speed control dial on the control panel slows motor speed for conveying roasted coffee beans, or increases speed for green beans and grounds.
Pneu-Con's Coffee Conveying System is enhanced with the addition of an innovative green coffee bean loader, for safer handling of green coffee beans.
Portable feed bin hoppers are available as an option for Pneu-Con's Coffee Conveying System. Conveying adapters and flow control valves are also available.
Automatic filter cleaning system built into cover assembly. Halting compressed air flow and flexing filter media causes particles to drop from pleats into a hopper.
Frequently asked questions
Some of the advantages of choosing a pneumatic conveying system over a mechanical transport system are adaptability to virtually any site configuration, ease of maintenance, and faster ROI. Pneumatic conveying systems can also move dry bulk materials farther than conventional mechanical systems, at a lower cost.
Pricing for a pneumatic conveying system varies from project to project, and from application to application. We treat every customer’s project as a custom design, but can often put together a bulk material handling solution using standard parts. This approach can save the customer time and reduce overall costs. We can also design and engineer a complete custom pneumatic conveying system based on a customer’s specifications, and for those bulk material applications which have unique requirements.
Pneu-Con can design and engineer any type of bulk material handling system for most applications. We engineer and manufacture pneumatic conveying systems and can integrate our systems with components and controls from other manufacturers.
Our full range of services includes market research, design, engineering, integration, commissioning, startup, repair, parts, maintenance and staff training of complete bulk material processing systems and solutions.
You can reach the Pneu-Con sales team by calling 1 (800) 655-4481 from 7:00am - 5:00pm, Monday through Friday. Outside of regular business hours, you can send an online message to sales for email delivery. Our sales team will get back with you during regular business hours.
To request a quote, please complete our online RFQ form and submit it with your project information and contact details. Your request will be sent to one of our team members who will contact you during regular business hours with a quote, or to discuss your project.